Reference Normative - OEM BM/2/AS Manual De Uso Y Mantenimiento

BM/2/AS
General specifications and warning
- In case of works to be done in a position that
cannot be reached from the ground, use safe
ladders or lifting devices only, in conformity
with the local safety regulations.
- In case of repairs to be done near or under
the machine, make sure that:
• there are no machine devices and compo-
nents that can start working and/or instable
parts placed on or near the machine.
- Do not use your hands instead of suitable
tools to work on the machine.
- Do not use your hands or other tools to stop
any moving parts.
- Do not use matches, lighters or flames near
the machine.
- YOUR BEST ATTENTION SHOULD BE
PAID TO THE WARNING PLATES LOCA-
TED ON THE MACHINE BEFORE DOING
ANY WORK ON THE MACHINE OR NEAR
THE MACHINE.
- The user is obliged to keep all the warning
plates in legible conditions and, if required, to
change their position in order to make them
fully visible to the operator.
- Moreover the user is obliged to replace any
warning plate that, for any reason, has been
damaged or is not clearly legible. New warning
plates can be obtained through our Technical
Service Centre.
- Stop the machine before doing any repair
work.
- In case of malfunction of the machine or da-
mages to its components, get in touch with
the maintenance engineer and do not try to
repair the machine.
- It is absolutely prohibited to use the machi-
ne for other purposes different from those
expressly indicated and documented.
Use of the machine must always take place
with the methods, timing and location set out
by good technical practice, in accordance with
machine directive 2006/42 and complying
with workplace health and safety standard as
set out by current laws of the country where
the machine is used.
- Company manufacturer or its Agent decli-
nes all responsibility for any accident or
damage to persons or properties arising
from the non compliance with the safety
regulations and the directions of this
booklet.
- THESE SAFETY REGULATIONS INTE-
GRATE OR COMPLEMENT THE LOCAL
SAFETY REGULATIONS.
- DO NOT make hurried or inaccurate
repairs that may compromise the good
running of the machine and the safety of
the operator.
- IN CASE OF DOUBT ALWAYS ASK FOR
THE PRESENCE OF SKILLED PERSON-
NEL.
- FOR ANY ELECTRIC/ELECTRONIC OR
MECHANIC TAMPERING OF THE MA-
CHINE BY THE USER OR IN CASE OF A
NEGLIGENT USE OF THE MACHINE, THE
MANUFACTURER IS RELIEVED FROM
ANY RESPONSIBILITY AND THE USER
WILL BE THE ONLY ONE RESPONSIBLE
AGAINST THE COMPETENT AUTHORI-
TIES FOR THE ACCIDENT PREVENTION.

1.2 - REFERENCE NORMATIVE

- The machine and its safety components
have been manufactured in compliance with
the directives indicated in the declaration of
conformity.
GB - 3