Sinmag Europe LAMINATO Manual Del Usuario página 9

10. The side machine cover must be closed unless the servicing is being done for this
part in which case the machine should be disconnected.
11. Before lifting the transportation platform, please lift the safety grid first.
11. CLEANING
11.1. Scrapers
Remove the tension spring, remove the top scraper, clean and put it back.
Remove the tension spring, pull the bottom scraper up and remove it, clean and put it
back.
Do not use any sharp or pointed instrument to scrape off bits of dough that have
hardened on the scraper. Rub the scrapers over with a damp cloth.
11.2. Flour tray
The tray can be pulled out, please clean all the bits of dough in the tray with water and
dry it after daily use.
11.3. Roller
Clean the roller with water, then rub it with a damp cloth.
11.4. Working area
Please keep the working area clean and ventilated.
12. MAINTENANCE
1. Dismantling conveyor belts
A. Take off the machine table.
B. Turn the two hand nuts to reduce the tension of the belt.
C. Remove belt from table.
2. Cleaning conveyor belt
Belts must only be brushed clean when they are dry.
NEVER clean them when they are still wet.
13. TROUBLESHOOTING
13.1 Transportation platform can't run
Check whether the power switch is on
Check whether the emergency button is on
Check whether the micro switch is well-positioned and working
Check whether the transformer is in good condition
Check whether the motor and the belt are well linked
Check if any damage on motor
13.2 The transportation platform can only run in one direction
Check if any damage on electromagnetic contactor
Check if any damage on manual lever
Check if any damage on footboard switch
13.3 Only one transportation platform can run
Check whether the transportation platform is well located
Check whether the conveyor belts are well-tightened
Call for professional electrician
SINMAG EUROPE BVBA
ENG
9