Cleaning And Maintenance; Technical Specifications - cecotec SEALVAC 140 STEELCUT Manual De Instrucciones

Ocultar thumbs Ver también para SEALVAC 140 STEELCUT:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 9
ENGLISH
How to seal jars
1. Insert one end of the vacuuming hose into the air-suction orifice and insert the other end
to the opening of the jar.
2. Press the external-suction button in order to vacuum the air out of it. This function will be
completed when the sound stops. Stop the function manually just by pressing the button
again.
How to seal zipper bags
1. Insert one end of the vacuuming hose into the air-suction orifice and insert the other end
to the opening of the zipper bag
2. Press the external-suction button in order to vacuum the air out of it. This function will be
completed when the sound stops. Stop the function manually just by pressing the button again.
Note: After sealing 5 bags in a row, allow the device to cool down for about a minute.
The vacuum sealing or sealing process can be stopped and cancelled at any moment by
pressing the cancel button.
You may stop the sealing process by pressing the Stop button.

4. CLEANING AND MAINTENANCE

Disconnect the appliance from the power supply and allow it to cool down before cleaning.
Use a soft, damp cloth to clean the product's surface.
Do not immerse the appliance in water or other liquid.
Do not use abrasive scouring pads, powders or cleaners.
Do not use any hard or sharp objects to remove any adhesive from the device, otherwise it
could be damaged.
Wipe off the upper and the lower sealing rings, as well as the press seal with a damp cloth.
Make sure the appliance is dry before using it again.

5. TECHNICAL SPECIFICATIONS

Product reference: 04258
Product: SealVac 140 SteelCut
140 W, 220-240 V~, 50/60 Hz
IP X0
Includes roll bag of 28*300 cm
Admits general bags
24
SEALVAC 140 STEELCUT
6. DISPOSAL OF OLD ELECTRICAL APPLIANCES
The European directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE), specifies that old household electrical appliances must
not be disposed of with the normal unsorted municipal waste. Old appliances
must be collected separately, in order to optimize the recovery and recycling
of the materials they contain and reduce the impact on human health and
the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation to dispose
of the appliance correctly. If the product has a built-in battery or uses batteries, they should be
removed from the appliance and disposed of appropriately.
Consumers must contact their local authorities or retailer for information concerning the
correct disposal of old appliances and/or their batteries.
7. TECHNICAL SUPPORT SERVICE AND WARRANTY
This product is under warranty for 2 years from the date of purchase, as long as the proof
of purchase is submitted, the product is in perfect physical condition, and it has been given
proper use, as explained in this instruction manual.
The warranty will not cover the following situations:
The product has been used for purposes other than those intended for it, misused, beaten,
exposed to moisture, immersed in liquid or corrosive substances, as well as any other fault
attributable to the customer.
The product has been disassembled, modified, or repaired by persons, not authorised by the
official Technical Support Service of Cecotec.
Faults deriving from the normal wear and tear of its parts, due to use.
The warranty service covers every manufacturing defects of your appliance for 2 years, based
on current legislation, except consumable parts. In the event of misuse, the warranty will not
apply.
If at any moment you detect any problem with your product or have any doubt, do not hesitate
to contact Cecotec Technical Support Service at +34 963 210 728.
ENGLISH
SEALVAC 140 STEELCUT
25

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido