Dexter 20VMT2-20.1 Manual De Instrucciones página 313

5. OPERATION
Tool attachments
Scraper
Diamond
Tipped
segment
saw blade
Triangular
carbide grout
removal rasp
BATTERY PACK
Use only original recommended lithium-ion battery pack with the voltage stated on the type plate
of your power tool. Using other batteries can lead to injuries and pose a fire hazard.
1. To insert the battery pack, slide it into the holder of battery pack until it is engaged and securely
locked in position.
2. To remove the battery pack, press the release button on the battery pack and pull out the
battery pack.
Notes: This is information for your reference. For details, pls. read the instruction of the battery
pack.
SWITCH LOCK
1. To activate the switch lock, push the lever of switch lock to a left stop as instructed by the
indicator of locking at housing.
2. To deactivate the switch lock, push the lever of switch lock to a right stop as instructed by the
indicator ofun-locking at housing.
ON/OFF SWITCH
If the switch lock was already activated, It is not possible to actuate On/Off switch, please deactivate
the switch lock firstly.
1. To start the machine, press the On/off switch and keep it pressed.
The power light lights up when the On/off switch is pressed, and allows the work area to be
illuminated when lighting conditions are insufficient.
Material
Paint & varnish, bonded
carpet, soft adhesives,
vinyl flooring, wood and
other floor coverings
Cement joints, soft
wall tiles, epoxy resin,
fibreglass-reinforced
plastics
Mortar, concrete residue,
wood, abrasive materials
Application
Scraping surfaces, of
carpet
Removing grout between
wall or floor tiles.
Rasping and cement,
plaster thin-set mortar
FR FR
ES ES
PT PT
IT IT
EL EL
PL PL
RU RU
UA KZ
KZ UA
RO
RO
BR
BR
EN
EN
313