Newteck Secadry XLL Manual De Instrucciones página 17

4. When the structure is finally assembled, gently pull the outer cover up from
the bottom. Place the main device (H) in the centre of the lower fixed shelf,
the air vent of the device should coincide with the air vent on the outer cover.
Close the outer cover to finish assembling the dryer.
5. Dismantling: to dismantle the device, follow the assembly steps in the
reverse order.
Mode of use
1. Connect the supply plug to the electrical current.
2. Place the items of clothing on the shelfs, which have firstly been wrung out
and are not dripping. Close the outer cover.
3. Turn on the device by turning the control wheel (5) to the right:
Upper level/shelf
Middle level/shelf
Lower level/shelf
Gently close the cover
from bottom to top
17