Circuit Diagram; General Information; English - Pahlen 300A Manual De Instrucciones

LED light type 300 Marine
Type 300A, for concrete pools:
Item no 124281
Item no 124381
Only for use under water.
The pool light shall be connected through an isolation transformer 12V AC 60W alt. 300W.
If several lamps are to be installed, these should all connect to the same transformer and switch, see circuit diagram below.
Pay attention to local electric directions, as to the placing of the junction box.
The light must be completely covered with water before lighting.
If the external cable or cord is damaged, it should be replaced by a service agent or a qualified person.

Circuit diagram

Example 1:
Lamp - effective output 50W
Circuit diagram for LED-lamps
TR1 60W alt. 300W
L1
IN
OUT
230V AC 12V AC
N
alt.

General information

Recommended values for water quality:
Total chlorine content: max 3.5 mg/liter (ppm)*
Chloride (salt) content: max 250 mg/liter
pH-value: 7.2–7.6
Alkalinity: 60–120 mg/liter (ppm)
Calcium hardness: 100–300 mg/liter (ppm)
Iron: max 0.1 mg/l *
Copper: max 0.2 mg/l *
Manganese: max 0.05 mg/l *
Phosphorus: max 0.01 mg/l *
Nitrate: max 50 mg/l *
Outside these values the product warranty does not apply.
Dimensions
LED light red/green/blue
LED light white
Example 2:
Lamp - effective output 28W
50W Circuit diagram for LED-lamps 28W
TR1 60W alt. 300W
L1
IN
LA1
230V AC
50W
N
LA2
50W
alt.
LA3
50W
LA6
50W
E10016-0
2007-07-11ASA
Type 300CA
Ø170
Ø170
Surface treatment
E
The tolerance class in accordance with this
part of ISO 2768-1
Type 300CA, for pools with liner
Item no 124291
Item no 124391
OUT
LA1
12V AC
28W
LA2
28W
alt. alt.
LA3
28W
LA10
28W
* Complies to EN 16713-3
Ø172
140 25
140 25
9
Designed by: Drawn by: Date
ASA 2011-09-29
Assembly drawing no. Art.no.
Scale
Belysning 300CA LED

ENGLISH

LED light red/green/blue-lampa
LED light white
Measurements for hole type 300CA
UP
UP
45°
Ø240
n 240
Ø12(3x)
n 12(3x)
Ø257
Ø257
Surface treatment Designed by:
E
The tolerance class in accordance with this Assembly drawing no.
part of ISO 2768
Håltagningsmall för
E10077-0
belysning typ 300 CA vinyl
2010-06-03 ASA
Box 728, SE-194 27 Upplands Väsby, Sweden
Phone +46 8 59411050, Fax +46 8 59086880
Type 300A
140
140
Surface treatment
E
The tolerance class in accordance with this
Approved by: part of ISO 2768-1
Belysning 300A LED
124X9Y
Marine
Revised by: Date
Box 728, SE-194 27 Upplands Väsby, Sweden
Ø14(8x)
n 14(8x)
Drawn by: Date Approved by:
OA 2006-04-26
Art.no.
Scale Revised by: Date
1:2 OA 2007-09-20
Drawing number Rev.no.
M10112 2
36 22
36 22
Designed by: Drawn by: Date Approved by:
ASA 2011-11-03
Assembly drawing no. Art.no. 124X81
Scale Revised by: Date
TS 2012-03-19
Drawing number Rev.no.