Cleaning And Care - Mondial A-10 Manual De Instrucciones

INTRODUCTION
Thank you for trusting in Mondial. To ensure proper operation and maintenance of the
product, carefully read the instructions in this manual and keep it in the event that you may
need in the future. We recommend that you also keep the packaging in case of repairs, and
dispose of all plastic bags that could become dangerous toys for children.
The appliance is very easy to use. Just connect it to the electricity supply socket (220-
250V).
If you need more information, please contact Mondial.
Advice:
The use of Mondial appliances by children needs clear instructions of use and
constant supervision during use of the appliance.
OPERATION
The instrument consists of the following parts, see fig.A:
Before using the appliance:
˃ Unpack the appliance.
˃ Clean the appliance. See "Cleaning and Care"
How to mount:
˃ Remove the heater from the package and place it upside down on a soft and firm
surface.
˃ Attach the four wheels to the feet by inserting them in the corresponding holes in
each of the two feet. Fig. 01.
˃ Position the feet according to the L and R indications (L for left and R for Right)
engraved on their inner part and use the screws supplied to attach them to the
lower part of the body of the heater. Fig.02
1
12 UK
˃
NOTE: The aforementioned screws for attaching the feet may be delivered already
attached in their respective places.
Use (See fig.A)
˃
˃
˃
˃
˃
˃
˃
˃
˃
˃
˃
˃
˃
˃
˃
2
˃
˃
˃
˃
by damages to the insulating layer.
˃
Place the heater in the vertical position and check if the wheels are working
perfectly to move the appliance before connecting it to the power mains.
Make sure the Power Selector is in the (0) OFF position.
Make sure the Temperature Selector is in the (•) OFF position.
Connect the cable plug to the outlet according to the voltage of your heater.
Turn the Power Selector in the clockwise direction to one of the two positions of
your choice:
• I for Minimum Power – 750 W.
• II for Maximum Power – 1500 W.
To adjust the room temperature to the desired level, turn the Temperature Selector
to the right to increase the temperature or to the left to reduce the temperature.
The Pilot Light will turn on after activating the Temperature Selector and it will turn
off when the selected temperature is reached.
The Thermostat automatically turns the heater off when the selected temperature
is reached, automatically turning it back on when the room temperature drops,
keeping it stable.
After use, put the Temperature and Power Selectors in the off position and remove
the plug from the outlet.

CLEANING AND CARE

The frequent cleaning with a piece of cloth will extend the useful life of the heater.
Always put the Temperature and Power Selectors in the OFF position and remove
the plug from the power outlet before cleaning.
Make sure it is disconnected from the power supply.
Wait until the appliance has cooled down completely.
For external cleaning, wipe with a dry or slightly damp, soft cloth not to scratch the
finishing material of the surfaces.
Never use scouring pads, bushing wad or any kind of abrasive cleaners or
materials, as they may damage your appliance.
Never use abrasive cleaning products, brushes, gasoline, kerosene, glass
cleaner or diluents to clean the heater.
Do not use waxes or polishing materials since these may react with the heat and
cause discoloration of the paint.
Never immerse the appliance in water.
Do not connect the heater to the power mains to dry it.
Do not dry by direct exposure to sunlight in order to avoid safety problems caused
After cleaning, place the heater in a cool and ventilated place and leave it to dry
naturally.
UK 13