Cleaning And Care - Mondial A-04 Manual De Instrucciones

INTRODUCTION
Thank you for trusting in Mondial. To ensure proper operation and maintenance of the
product, carefully read the instructions in this manual and keep it in the event that you may
need in the future. We recommend that you also keep the packaging in case of repairs, and
dispose of all plastic bags that could become dangerous toys for children.
The appliance is very easy to use. Just connect it to the electricity supply socket (220-
250V).
If you need more information, please contact Mondial.
Advice:
The use of Mondial appliances by children needs clear instructions of use and
constant supervision during use of the appliance.
OPERATION
The instrument consists of the following parts, see fig.A:
Before using the appliance:
˃ Unpack the appliance.
˃ Clean the appliance. See "Cleaning and Care"
Assembly:
˃ Your MONDIAL OIL HEATER is provided with two supports and respective
wheels.
˃ The appliance should only be used after mounting these accessories on the lower
part of your heater.
˃ To attach the wheels, put the appliance in the inverted position and on a soft
surface to avoid scratching the paint.
˃ Each set of support consists of a U fastener, one wing nut and one foot with two
wheels.
˃ Install the "U" fastener between the blades of each end of the lower part of the
appliance.
˃ Insert the feet through the corresponding orifices and fasten them with the wing
nut provided.
˃ Proceed in the same way with the other set of support.
NOTE: The Mondial Oil Heater has an exclusive safety system that turns off the
appliance in case of fall or instability. Ensure that the product it is mounted correctly.
12 UK
Use (See fig.A)
˃ Place the appliance on the floor at a minimum distance of 45 cm from the wall.
˃ Do not place the appliance directly below an outlet.
˃ Make sure the Power selector is in the "0" OFF position.
˃ Connect the cable plug into the socket.
˃ Turn the Power Selector in the clockwise direction to one of the three positions of
your choice:
• "600" for Minimum Power
• "900" for Medium Power
• "1500" for Maximum Power
˃ Turn the Temperature Selector Thermostat completely to the right. Until it reaches
the maximum position.
˃ To adjust the room temperature to the desired level, turn the Temperature Selector
Thermostat to the right to increase the temperature or to the left to reduce the
temperature.
˃ The Thermostat automatically turns off the heater when the selected temperature
is reached, and it also turns it on automatically.
˃ After use, put the Temperature and Power Selectors in the off position and remove
the plug from the outlet.
IMPORTANT:
This appliance operates on oil, which is why it cools slowly after it is turned off. Allow
the heater to cool well before moving it or keeping it.
The oil does not have to be refilled nor completed. The product is sealed and the oil is
not consumed.
This heater is extremely silent and does not burn oxygen.

CLEANING AND CARE

˃ Wait until the appliance has cooled down completely.
˃ Always put the Temperature and Power Buttons in the (0) OFF position and
remove the plug from the power outlet before cleaning.
˃ For external cleaning, wipe with a dry or slightly damp, soft cloth not to scratch the
finishing material of the surfaces.
˃ Never use steel wool, wad or any kind of abrasive cleaners or materials, as they
may damage your appliance.
˃ Do not use waxes or polishing materials since these may react with the heat and
cause discoloration of the paint.
˃ Never immerse the appliance in water.
UK 13