Sunstech uSUN100 Manual Del Usuario página 38

EXPOSURE TO RADIO WAVES.
Your mobile device is a radio transmitter and receiver. It was designed
to not exceed the limits of exposure to radio waves (electromagnetic
fields of radiofrequency) recommended by international standards.
The standards were developed by an independent scientific
organization (ICNIRP) and include a substantial safety margin designed
to ensure the safety of all people, regardless of their age or state of
health.
The exposure to radio wave standards use a measurement unit known
as the Specific Absorption Rate, SAR. The SAR limit for mobile devices
is 2 W/Kg. The SAR tests are carried out using standard operation
positions with the device transmitting at its maximum certified energy
level in all frequency bands. The highest SAR amounts under the
ICNIRP standards for this device model are:
Maximum SAR for this model and conditions under which it registered
SAR for positions near the
head.
SAR for positions near the
body.
During the use, the real SAR values for this device are usually a lot
lower from the values indicated previously. This is due to maximizing
the system's efficiency and to minimize the interference with the
network, the operation capacity of your mobile device reduces
automatically when the maximum power is not needed for the call.
The lower the amount of energy leaving the device, the lower the SAR
amount will be.
A SAR test was carried out with the device on the body with a distance
of 1.5 cm. To comply with the radiofrequency exposure requirements,
while using the device on the body, the device shall have to be at least
1.5 cm away from the body.
Some organizations, like the World Health Organization or the Food
and Drug Administration of the United States suggest that if users
want to reduce exposure, they can use a hands free accessory to main
the wireless device far away from the head and body when in use, or
reduce the amount of time spent using the device.
0.285 W/Kg
0.0399 W/Kg
36