Loading The Racks; Upper Rack; Lower Rack - Franke FDW 4510 E8P A++ Manual De Usuario

LOADING THE RACKS

UPPER RACK

ADJUSTING THE HEIGHT OF THE UPPER RACK
The height of the upper basket can be adjusted:
high position to place bulky crockery in the
lower basket and low position to make the most
of the tip-up compartments by creating more
space upwards.
The upper rack is equipped with a Upper Rack
height adjuster (see figure), without pressing
the levers, lift it up by simply holding the rack
sides, as soon as the rack is stable in its upper
position. To restore to the lower position,
press the levers (A) at the sides of the rack and move the basket
downwards.
We strongly recommend that you do not adjust the height of the
rack when it is loaded.
NEVER raise or lower the basket on one side only.
FOLDABLE FLAPS WITH ADJUSTABLE POSITION
The side foldable flaps can be fold or unfold
to optimize the arrangement of crockery
inside the rack.
Wine glasses can be placed safely in the
foldable flaps by inserting the stem of each
glass into the corresponding slots.
Depending on the model:
• to unfold the flaps there is needed to slide
it up and rotate or release it from the snaps
and pull it down.
• to fold the flaps there is needed to rotate
it and slide flaps down or pull it up and
attach flaps to the snaps.
SLIDING TRAY
16-Apr-2019 07:52:12 EDT | RELEASED
Load delicate and light dishes: glasses,
cups, saucers, low salad bowls.
(loading example for the upper rack)
The upper rack is fitted with a sliding tray
which can be used to hold small crockery
and cutlery. For optimum washing perfor-
mance, avoid positioning bulky crockery
directly below the tray. The tray is remo-
vable.
In some European factories the letter "W" of the part code mentioned herein will be automatically

LOWER RACK

The lower rack has a Space Zone A (in selected models with different
numbers and positions), a special pull-out support in the rear of the
rack that can be used to support frying pans or baking pans in upright
position, thus taking up less space.
In order to use it, just get hold of the coloured grip and pull it upwards
B while rotating it forward. The supports can slide right and left to fit
the size of the crockery.
A
The lower rack has tip-up supports which can be used in a vertical po-
sition when arranging plates or in a horizontal position (lower) to load
pans and salad bowls easily.
CUTLERY BASKET
It is fitted with top grids for improved cutlery arrangement. It must
only be positioned at the front of the lower rack.
Knives and other utensils with sharp edges must be placed in the
cutlery basket with the points facing downwards or they must be
positioned horizontally in the tip-up compartments on the upper
rack.
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
For pots, lids, plates, salad bowls, cutlery
etc.... Large plates and lids should ideally
be placed at the sides to avoid interferen-
ces with the spray arm.
(loading example for the lower rack)
B
EN
7