Maintenance; Servicing; Cleaning & Disinfection; Important - Bien-Air Dental CHIROPRO 3rd Gen Instrucciones De Uso

1
FIG. 1

11 Maintenance


CAUTION
Only use original Bien-Air Dental maintenance products and parts
or those recommended by Bien-Air Dental. Using other products
or parts may cause operational failure and/or void the guarantee.

11.1 Servicing

Never disassemble the device. For any modification and repair,
we recommend that you contact your regular supplier or Bien-Air
Dental SA directly.
Note 1
11.2 Cleaning & disinfection
FIG. 1
• Disinfect the surfaces of the Chiropro 3
footpedal by gently rubbing with a clean cloth soaked in a
suitable product (i.e. Bien-Air Dental Spraynet or isopropyl
alcohol for about 15 sec.).
• Remove the knob (1) and sterilize it a class B autoclave at
135°C.
Note 2
• Do not immerse in disinfectant solution.
• Not designed for an ultrasonic bath.
• Use a new sterile irrigation line for each patient.
• Use a new sterile protective sheet for each patient.
22

11.3 Important

For maintenance: ....................................See instructions for use
MX-i LED 3
Cable for micromotor..............................REF 2100163
Contra-angle CA 20:1 L, light................REF 2100209
Contra-angle CA 20:1 L
Micro-Series, light....................................REF 2100209
Contra-angle CA 20:1 L KM, light.........REF 2100209
Contra-angle CA 20:1 L KM
Micro-Series, light....................................REF 2100209
Straight Handpiece 1:1 ..........................REF 2100046
rd
Gen unit and
rd
Gen micromotor ..............REF 2100245