Steam Iron
Fabric type
Synthetic fabrics:
Acetate, acrylic, viscose,
polyamide (nylon),
polyester (rayon)
Silk, wool
Cotton, linen,
jeans
1. Place the device on the pedestal
12
to 0 (see Fig. D).
2. Insert the power plug in a suitable socket. The power LED
3. Set the temperature control dial corresponding to the data on the care label
of your piece of laundry. The temperature you have set will be reached after
approximately 2 minutes. The operating control light
while the iron is heating up. It will go out as soon as the set temperature has
been reached.
4. You can now iron the desired textiles. Be sure to observe the notes specified
below in the process.
NOTICE!
Risk of damage!
The temperature will remain constant while the iron
is in use.
− If you reduce the temperature during operation,
you should wait approximately 2 minutes before
you continue ironing to avoid damaging the
textiles.
16
www.aldi.com
MODEL: 92154 02/2015
Steam ironing
No
No
Yes
8
and turn the temperature control dial
USA
Operation
Temperature
setting
•
••
••• up to MAX
5
will illuminate.
9
will be illuminated
AFTER SALES SUPPORT
1 855 754 8297
USA