Fault Table - EASYHOME 92154 Manual Del Usuario

USA

Fault table

Fault table
Problem
The soleplate doesn't
heat up although the
iron is on.
The steam iron does
not produce any
steam.
The steam burst func-
tion is not working.
Water may leak out
of the soleplate while
ironing.
AFTER SALES SUPPORT
1 855 754 8297
USA
Possible cause
Connection problem.
The temperature control
dial is set to 0.
Not enough water in the
water tank.
The steam control dial
has not been set to
steam production ( ).
The selected tempera-
ture is lower than the
required setting for the
steam function.
The steam burst function
was used several times
within a short period of
time.
The iron is not hot
enough.
The iron is not hot
enough.
Steam Iron
Solution
Check the power cord,
plug and socket.
Select a suitable
temperature.
Fill the water tank.
Set the steam control
dial between minimum
and maximum steam
production.
Set the correct tempera-
ture for steam ironing
( up to MAX).
Set the iron down in a
level position and wait
before you use the
steam burst function.
Set the correct tempera-
ture for steam ironing
( up to MAX). Set
the iron down so that it
is in a vertical position
and wait until the oper-
ating control light goes
out.
Set the correct tempera-
ture for steam ironing
( up to MAX). Set
the iron down in a verti-
cal position and wait un-
til the operating control
light goes out.
www.aldi.com
MODEL: 92154 02/2015
23