Steam Ironing; Using The Steam Burst Function - EASYHOME 92154 Manual Del Usuario

Steam Iron

Steam ironing

WARNING!
Burn hazard!
The water steam that is emitted is very hot.
− Do not point the vapor stream at other persons
or animals.
− Keep your hands and other parts of your body
away from the textile while you are using the
steam burst function.
NOTICE!
Risk of damage!
Make sure that the water tank was filled before steam
ironing with water.
1. If applicable, fill the water tank with water as described under "Adding
water".
2. Set the temperature control dial
(see Fig. D).
3. Set the steam control dial
ing on the selected temperature and required amount of steam.
4. Now place the garment you would like to iron on the ironing board and iron
it. Steam will be emitted as soon as the soleplate is flat on the textile.
5. As soon as you place the steam iron on the pedestal
steam will stop.

Using the steam burst function

An extra amount of steam will be emitted with the steam burst function. This
may be useful if you would like to freshen up and smooth hanging textiles such
as curtains etc.
1. Select a high temperature for steam ironing (
Set the iron down on the pedestal and wait until the operating control light
goes out.
2. Press the steam button
emitted from the soleplate
18
www.aldi.com
MODEL: 92154 02/2015
12
to a position between ••• and MAX
2
to a position between
4
in order to release a steam burst. Steam will be
11
(see Fig. F).
USA
Operation
and MAX depend-
8
, the emission of
up to MAX).
AFTER SALES SUPPORT
1 855 754 8297
USA