Installing The Light - LIVARNO LUX 14129204L Instrucciones De Montaje

Remove the old rechargeable batteries
Insert the batteries
(see "Technical Data").
Note: When inserting the battery ensure the correct polarity!
This is indicated in the battery compartment
Close the battery compartment
and fix the cover by screwing on the screws
9

Installing the light

Note: Please remove all packaging material from the product
before assembly.
Note: Factor in the installation height specified (Fig. D
(14129204L) or F (14129304L)). The sensor
varies depending on the height.
Note: The maximum range of the sensor
5–8 m. The sensor
You can change the orientation of the spotlight
it upwards or downwards.
When you change the position of the spotlight, you also
change the sensor range (see Fig. D (14129204L or F
(14129304L)).
Note: The solar lamp should not be located in the vicinity of other
light sources such as street lamps or other lamps, as otherwise, the
LEDs cannot be switched on automatically.
Only 14129204L:
Carefully fold the solar panel
. Use only batteries of the specified type
10
detection angle is 90 °.
4
1
.
10
.
11
again with the battery cover
11
detection range
4
varies between approx.
4
upwards.
clockwise.
8
by swivelling
3
GB/IE 33