LIVARNO LUX 14129204L Instrucciones De Montaje página 34

14129204L:
Use the slotted holes of the mounting plate
screws
7
Now drill the fixing holes (Ø 6 mm, depth approx. 40 mm). Be-
fore drilling the fixing holes, ensure there are no gas, water or
electrical lines that could be drilled into or damaged in the area
where you will be drilling.
Insert the dowels
Attach the mounting plate
(Fig. B).
Ensure that the solar panel
Now place the spotlight
Ensure that the spotlight
Set the ON / OFF slider
position (Fig. A).
The rechargeable batteries will now charge when there is suffi-
cient solar radiation.
14129304L:
Use the slotted holes of the mounting plate
screws
7
Now drill the fixing holes (Ø 6 mm, depth approx. 40 mm).
Before drilling the fixing holes, ensure there are no gas, water
or electrical lines that could be drilled into or damaged in the
area where you will be drilling.
Insert the dowels
Attach the mounting plate
Now place the spotlight
that the spotlight
34 GB/IE
to mark the drill holes.
into the drill holes (Fig. B).
5
3
3
2
to mark the drill holes.
into the drill holes (Fig. B).
5
6
3
is positioned correctly (Fig. B).
3
using the screws provided
6
is orientated towards the sun.
1
onto the mounting plate
is positioned correctly.
on the spotlight
using the screws provided
onto the mounting plate
intended for the
6
7
(Fig. B).
6
to the „ON"
3
intended for the
6
(Fig. B).
7
. Ensure
6