Coarse Thread - Kreg Jig Jr Manual De Instrucciones

Choosing a Screw
Kreg offers a complete line of specialised screws for every
workpiece size and type. Use this graph to fi nd the correct
screw. All are available online, at www.kregjig.com or at
your local authorised Kreg dealer.
Screw Selection / Kreg Jig
Material
Thickness Length
1 1 ⁄ ⁄ ⁄ "
(12mm) 1" (25mm)
2
5 5
⁄ ⁄ ⁄ " (16mm) 1" (25mm)
8
3 3 ⁄ ⁄ " (19mm) ⁄ 1 1 1 ⁄ ⁄ ⁄ " (32mm)
4
7 7 ⁄ ⁄ " (22mm) ⁄ 1 1 1 ⁄ ⁄ ⁄ " (38mm)
8
1 1
1" (25mm) 1 ⁄ ⁄ ⁄ " (38mm)
1 1 1 ⁄ ⁄ " (29mm) ⁄ 1 1 1 ⁄ ⁄ " (38mm) ⁄
8
1 1 1 ⁄ ⁄ ⁄ " (32mm) 2" (51mm)
4
3 3
1 ⁄ ⁄ ⁄ " (35mm) 2" (51mm)
8
1 1 1 ⁄ ⁄ ⁄ " (38mm) 2 1 1 ⁄ ⁄ " (64mm) ⁄
2
1 ⁄ ⁄ ⁄ ( " (32mm) )
1 1 *Note: Screw length is measured from bottom of
4
the head to the tip of the screw
www.kregtool.eu
Setting Chart
®
Screw Kreg Jig
Setting
1 1 ⁄ ⁄ ⁄ "
(12mm) Marking
2
5 5
⁄ ⁄ ⁄ " (16mm) Marking
8
3 3 ⁄ ⁄ " (19 mm) Marking ⁄
4
7 7 ⁄ ⁄ " (22mm) Marking ⁄
2 8
1" (25mm) Marking
2
1 1 1 ⁄ ⁄ ⁄ " (29mm) Marking
2
1 1 1 ⁄ ⁄ " (32mm) Marking ⁄
3 3
1 ⁄ ⁄ ⁄ " (35mm) Marking
1 1 1 ⁄ ⁄ " (38mm) Marking ⁄
2
Fine Thread
®
Fine thread screws are
recommended for hardwoods as
they reduce the chance of the
material splitting when driven.
Use in woods such as:
• Ash • Oak • Maple • Walnut • Hickory • Cherry • Mahogany • Birch

Coarse Thread

Due to a signifi cantly larger
thread diameter, coarse thread
screws offer a much stronger
hold in composite materials such
as MDF and plywood.
Use in woods such as:
• Pine • Cedar • Basswood • Poplar • Plywood • Melamine• Particle Board
Choosing a Screw
Deep Square Drive
improves driver
engagement and
reduces the
possibility of
cam-out.
Self-Tapping
Auger point
eliminates the
need to drill a
pilot hole.
www.kregtool.eu