Troubleshooting; Disposal - Imetec F2010 Instrucciones De Uso

• It is recommended to place it in the package provided upon purchase for better storage.
• Store it in a dry place.
When you store the throw blanket, let it cool down before folding it.
ATTENTION!
objects on top of it which crease and/or deform it.
ATTENTION! After having finished using the appliance, make sure
it has completely cooled down before putting it away.
Inspect the appliance and the cable frequently to check for signs of wear and
tear. Should this be noted or in the case of malfunction, contact an authorised
technical assistance centre.
This chapter describes the most common problems related to appliance use. If the problems cannot be
resolved with the information below, please contact the Authorised Assistance Centre.
A tingling feeling is felt during use.
The display stand-by (9) flashes.
The product has been used incorrectly or it is damaged.
The power cord or any other internal wire is damaged.
The control unit is damaged.
The fabric is crumpled or creased.
There are holes or tears in the fabric.
The product is packaged in recyclable materials. Dispose of packaging in accordance with
the environmental protection standards.
Pursuant to Art. 26 of Italian Legislative Decree no. 49 of 14 March 2014 "Implementation of
Directive 2012/19/EU on waste electrical and electronic equipment (WEEE)", the crossed
bin symbol on the appliance or its packaging indicates that the product must be disposed
of separately from other waste at the end of its useful life. The user must therefore take
the appliance to an appropriate recycling centre for electrical and electronic equipment.
Alternatively, instead of handling the disposal, the appliance can be handed over to the retailer
when a new, equivalent appliance is purchased. Retailers of electronic products having a sales
area of at least 400 m
When you store the appliance, DO NOT place

TROUBLESHOOTING

Problem

DISPOSAL

can also be handed electronic products that are to be disposed of
2
Solution
Disconnect the plug and plug in again inverting
polarity.
Mark the side you used for future uses.
Check that the plug of the control unit Fig. [A] (2) is
fully inserted into the socket Fig. [A] (1). If the display
remains on, return the throw blanket to an authorised
technical assistance centre.
The throw blanket must only be checked by an
authorised technical assistance centre.
EN
15