Technical Data Sheet - Proline SHP65W2 Manual De Instrucciones

Outer Surface
Clean the outer surface of the range hood with a cloth dampened in warm soapy water. Wipe
dry.
Do not use too much water when cleaning the switches. Do not allow liquid to penetrate into
the electronics and cause damage.
Never use abrasive or chemical cleaning agents.
Changing the Lamp (E14 bulbs)
Before changing the lamp, disconnect the range hood from the mains socket to avoid the risk of
electric shock.
Switch off the fan and the lighting.
CAUTION: The lamp gets hot during use, allow it to cool down before touching.
Unscrew the lamp and screw a new lamp to the range hood.
TECHNICAL DATA SHEET
Below is the sheet of range hood according to EU regulations No 66/2014.
Brand
Description
Models
Rated Voltage and Frequency
Rated Power
Annual Energy Consumption (AEC
Time Increase Facor (f)
Energy Efficiency Inex (EEI
Energy Efficiency Class ❶
Fluid Dynamic Efficiency (FDE
Fluid Dynamic Efficiency Class ❷
Measured Airflow Rate at the Best
efficiency (Q )
BEP
Measured Air Pressure at best effciency
Point (P )
BEP
Maximum Airflow (Q
max
Airflow at Working Point (Highest
Setting)
Airflow at Working Point (Lowest
Setting)
Measured Electric Power Input at est
Efficiency Point (W )
BEP
Nominal Power of the Lighting System
(W )
L
GB
Proline
Range hood
SHP65W2
220‐240V~ 50Hz
140W (Motor: 1 x 100W, Lamp: 1 x 40W max)
) 88,5kWh/annum
hood
1,8
) 100,6
hood
Class E
) 6,6
hood
Class F
110,4m3/h
197Pa
170,8m3/h
)
165,0m3/h
133,2m3/h
92,1W
40,0W
9