Protective Bag (Life-Base 1 Ng Xs) - Weinmann LIFE-BASE 1 NG Instrucciones De Manejo

Ocultar thumbs Ver también para LIFE-BASE 1 NG:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Remove protective bag

4.4 Protective bag (LIFE-BASE 1 NG XS)

4. If there is a ventilator on the portable system: Route the
patient tube system through the front opening in the
protective bag.
5. Close the magnetic closures and hook and loop
fasteners on the front and rear.
1. Place the portable system on a firm, level surface.
2. Open the magnetic closures and hook and loop
fasteners on the front.
3. Open the push-buttons on the portable system and re-
move the portable system from the protective bag from
the rear.
1. Place the portable system on a firm, level surface.
2. Remove all the device components.
3. On the ventilator: push the underside of the protective
bag into the space between the portable system and
the ventilator from the front and pull the top of the pro-
tective bag over the portable system as far as the
handle.
Alternatively
on the defibrillator: push the protective bag over the
portable system from the front.
Assembly
EN
17

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Life-base 1 ng xlLife-base 1 ng xs

Tabla de contenido