DeWalt D55151 Manual De Instrucciones página 21

CoDE possIBlE CAusE
1 Regulator is damaged
14 Unit operating in damp or humid conditions
15 Restricted air intake filter
16 Pump oil is low
Carbon build-up in pump.
17
18 Detergent type oil being used in pump
19 Motor overload protection switch has tripped
Extension cord is wrong length or gauge
0
Loose electrical connections
1
Possible defective motor or starting capacitor

 Paint spray on internal motor parts
possIBlE solutIon
Replace.
Move unit to a dry well ventilated area
Clean or replace air intake filter
Add D WALT synthetic compressor oil to pump. See
e
Compressor pump oil under Maintenance.
Contact a D WALT factory service center or a D
e
authorized service center.
Drain oil and refill pump with D
oil.
See Motor overload under Features.
Check for proper gauge wire and cord length. See
Extension Cords under Installation.
Contact a D WALT factory service center or a D
e
authorized service center.
Contact a D WALT factory service center or a D
e
authorized service center.
Contact a D WALT factory service center or a D
e
authorized service center. Do not operate the compressor in
the paint spray area. See flammable vapor warning.
1
WALT
e
WALT synthetic compressor
e
WALT
e
WALT
e
WALT
e