List Of Components - Inglesina Huggy Isofix Manual De Instrucciones

INSTRUCTIONS

LIST OF COMPONENTS

fig. 1
A Support foot
B Support foot positioning indicator
C Release lever
D Isofix connectors
E Red/green indicators for base hooking on the car seat
F Support foot height adjustment lever
G Red/green indicators for hooking the seat on the base
H Isofix connectors release buttons
K Isofix anchoring points on the car seat
J Isofix connector protection plugs
IMPORTANT
• Verify where the Isofix anchoring points are positioned on the seat of the car and
check that they are free from any materials that could prevent their correct use.
• Verify that on the seat of the car there are not any items that may hinder the
correct leaning of the car base to the seat.
• Verify that the floor of the car is free from any materials that may hinder the correct
grip of the support foot.
• Verify that the backrest is in vertical position and the seat where the car base has
to be installed is NOT EQUIPPED WITH FRONT AIRBAG.
• Install the Huggy Isofix base exclusively in THE OPPOSITE DIRECTION TO THE
DRIVING ONE.
POSITIONING AND INSTALLATION OF THE INGLESINA HUGGY CAR SYSTEM
fig. 2 Extract the support foot (A) from beneath the car base until the suitable
indicator (B) signals GREEN.
fig. 3 Act on the release lever (C) and simultaneously extract the Isofix
connectors (D) from the car base completely.
fig. 4 Remove the protection plugs (J) from the base Isofix connectors by
pressing the two release buttons (H).
fig. 5 Fasten the base connectors (D) to the seat Isofix anchoring points (K) until
hearing clearly both CLICK sounds signalling the occurred hooking.
fig. 6 CAUTION: the correct hooking of the Huggy Isofix base occurs when
the proper indicators (E) from RED become GREEN.
fig. 7 Check that the Huggy Isofix base is properly hooked on both sides.
fig. 8 Adjust the height of the support foot (A) acting on the proper lever (F)
until touching the car floor. Release the lever (F) making sure that the extensible
part of the support foot remains blocked in its position.
CAUTION: it is important that the foot is firmly leaning on the car floor also if
the base is slightly lifted from the seat.
fig. 9 Install the Huggy Multifix or Huggy Prime car seat on the Huggy Isofix
base until hearing on both sides the CLICK signalling the occurred hooking.
18