Introduction; Reading The Use & Maintenance Manual; Symbols And Operators' Competence Levels; Important - CAMPAGNOLA VICTORY Manual De Uso Y Mantenimento

Campagnola Srl
1.

INTRODUCTION

1.1 Reading the Use & Maintenance Manual
Before working on the equipment, carefully read and understand this Use & Maintenance Manual in order to safe-
guard the operator and to avoid damaging the machine.
These instructions describe how to operate the equipment safely, economically and in compliance with the current
safety regulations. Following these instructions helps avoid dangerous situations, reduces repair costs and down-time
and extends the life-span of the machine.
This manual is to be kept legible and in good condition. The operating and maintenance staff must have it at hand, so
that it can be read whenever needed.

1.2 Symbols and operators' competence levels

All operations herein described must be performed by qualified personnel and in compliance with the manufacturer's
manual. Each procedure is accompanied by an icon which indicates the necessary operator's qualification. The indica-
tion to identify the personnel qualifications are given below.
Operator
Personnel who can install, operate, adjust, clean, repair, transport the equipment and carry out its routine mainte-
nance.
Qualified mechanic
Personnel with specific mechanical qualifications, capable of performing installation, special maintenance and/or repa-
ration processes and of operating the machine even when all its safety and protection devices are partially or totally
off.
Qualified electrician
Personnel with electric/electronic competences, capable of installing, servicing and/or repairing the product and of op-
erating it even when all its safety devices are partially or totally off. He cannot carry out interventions on the mechani-
cal system.
AUTHORIZED SERVICE POINTS
È l'officina autorizzata ad eseguire operazioni di riparazione sulle macchine CAMPAGNOLA.
WARNING!
Precautions to be taken in order to safeguard the operators and bystanders in the work area.

IMPORTANT!

Precautions to be taken in order to avoid problems with the equipment and to operate it in compliance with
the current safety regulations.

1.3 Compliance certificate

All the products marketed in the European Union (EU) must fully comply with the European Council Directive
2006/42/CE. The compliance certificate is supplied by the manufacturer with the Use & Maintenance Manual.

1.4 Receiving the product

When receiving the product, make sure:
•
the product has not been damaged during transport;
the product supplied matches with the order. Check that all parts have been delivered (refer to "Product Description",
"Specifications" chapter). If problems arise please, contact the manufacturer's Service Department quoting all details
indicated on the nameplate (refer to "Product Identification", "Specifications" chapter).

1.5 Warranty

As to the product warranty, please refer to the enclosed "Warranty claim" form.".
USE AND MAINTENANCE MANUAL – Translation of the original Instructions
Ver.1.0 - Rev.: 01, Date: 20/10/2014 Pag. 21