Archos Smart Home Guía De Usuario página 18

ARCHOS HOME - First Time Setup
If the pairing process fails, you have the following message:
Is Bluetooth turned ON in the tablet?
1 Select the Settings app on the tablet.
2 In the Wireless & networks section, restart Bluetooth.
Is the pairing indicator of the accessory blinking?
To turn it on, hold the pairing button of the accessory for 5 seconds.
You should restart the pairing.
TIPS:
When you long press the Pairing button (5 seconds)
LED blinks for 60 seconds: The device is in pairing mode and is trying to connect to a tablet.
When you do a short press on the Pairing button
LED blinks for 10 seconds: The device is already paired but is disconnected. It tries to connect.
LED blinks 3 times: The device is unpaired and disconnected.
LED is ON for 5 seconds: The device is paired and connected.
LED blinks fast: An over-the-air update is occuring.
18
UserGuide_ARCHOS_Smart_Home_Tablet_book.indd 18 15/05/2014 16:05:34