Archos Weather Tag - Archos Smart Home Guía De Usuario

ARCHOS Weather Tag

Description of the Weather tag
Pairing indicator
1
Pairing button
2
Opening
3
Sticker
4
When you long press
the Pairing button
(5 seconds)
When you do a short
press on the Pairing
button
6
UserGuide_ARCHOS_Smart_Home_Tablet_book.indd 6
Putting into service the Weather tag
Your Weather Tag functions with a Lithium cell CR 24
30 battery.
1. Remove the rubber case.
2. Detach the top from the back case.
3. Remove the insulation label "remove before use".
4. Replace the back case and rubber.
5. Remove the sticker on the back case to stick the
device to a wall.
LED blinks for 60 seconds
LED blinks for 10 seconds
LED blinks 3 times
LED is ON for 5 seconds
LED blinks fast
The device is in pairing mode and is
trying to connect to a tablet.
The device is already paired but is
disconnected. It tries to connect.
The device is unpaired and disconnected.
The device is paired and connected.
An over-the-air update is occuring.
15/05/2014 16:05:21