Cleaning And Maintenance; Replacing The Fuse - TECshow BAM 10A UHF Manual De Usuario

Cleaning and maintenance

DANGER TO LIFE!
Disconnect from mains before starting
maintenance operation!
• We recommend a frequent cleaning of the PA system.
Please use soft lint-free and moistened cloth. Never
use alcohol or solvents!
• There are no serviceable parts inside the device except for
the fuse. Maintenance and service operations are only to
be carried out by authorized dealers.
• Should you need any spare parts, please use genuine parts.
• If the power supply cable of this device becomes dam-
aged, it has be replaced by a special power supply cable
available at your dealer.
• Should you have further questions, please contact
your dealer.

Replacing the Fuse

If the fine-wire fuse of the device fuses, only replace the fuse
by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuseholder on the rear panel with a fit-
ting screwdriver.
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing.
Loudspeakers
If a speaker system distorts, one of the loudspeakers may be
defective. In this case the PA system should not be operated
any more in order to prevent further damage. Please contact
your dealer.
If clacking sounds are heard from a speaker system, screws
may have loosened due to the continuous vibrations. The
speaker system should be checked by a specialist.
BAM 10A UHF
ENGLISH VERSION
p. 15