9 – Line input
Stereo input (6.3 mm jack and RCA L/R) for connecting audio
units with line level (e.g. CD player) for channel 5/6.
10 – Level control channel 5/6
11 – Level control audio player
12 – Intensity control
Adjusts the overall intensity of the internal echo effect.
13 – Recording output
Stereo output (RCA L/R) for the master signal for connecting
the input of a recorder.
14 – Power indicator
15 – Phantom power selector switch
When engaged, a 15 V phantom power is switched on for all
XLR microphone inputs. Phantom power is a lower DC voltage
which most professional condenser microphones require.
16 – Clip indication
Lights red if the internal power amplifire selection is overloaded.
17 – Master control
Level control for the master signal sent to the speaker outputs.
18 – Audio player with LCD and 6 operating buttons
19 – Speaker outputs
6.3 mm jcks, L/R for connecting the left and right speaker.
20 – Voltage selector swich
21 – Power on/off
22 – Fuse holder
Only replace the fuse when the device is disconnected from
mains. Only use of the same rating and power.
23 – Power input
Used to plug in the supplied power cord.
BAM 10A UHF
ENGLISH VERSION
p. 6