Technical Characteristics - UCS EPS DC Manual De Uso

GB
EPS 24 VDC
The control panel provides window opening/closing control with 24 VDC actuators using an opening/closing
operation with polarity inversion.
and, if necessary, briefly reversing their direction when an obstacle is detected in the window slot.
The opening/closing control may be used for button-operated ventilation (part no. 41013B or equivalent) or using a
24 VDC control with polarity inversion (e.g. with an EFC control unit - part nos. 40730Q, 40731R or 40732S – or
with a BMS system). The 24 VDC control with polarity inversion takes priority over the ventilation control; the
sensor can also be disabled in the event of an emergency open command (a feature which is included when
connecting to an EFC control unit).
CAUTION:
•
read the instruction manual carefully before assembling
•
keep this manual also after installation for any further issue
•
incorrect or improper installation may cause failure of the system and/or injury to things or people
•
electrical connections must carried out by qualified people only
•
turn the power off before opening the control unit

TECHNICAL CHARACTERISTICS

Dimensions LxHxD: 154 x 113 x 75 mm
Voltage supply: 24 VDC
Nominal output current: 4 A
Signals: unpowered contact alarm output; internal LED
Outputs:
- 1 x 24 VDC motor output with polarity inversion, maximum load 4 Amps
- 1 clean contact alarm output (max 24V – 2A)
Inputs:
- 1 input per button (part no. 41013B or equivalent)
- 1 input for 24 VDC power supply
- 1 input per external 24 VDC command with polarity
inversion
- 1 input per sensor (part no. 41343J or equivalent)
N.B.: if using part 41343J, no more than 3 sensors may be
installed on the control unit
Equipment:
- 4 x PG9 cable clamps
- 2 x PG7 cable clamps
Doc. 84361C - Rev.27/06/11
ENGLISH
Connected to a presence sensor it offers a non-slip operation, stopping the actuators
4 - 17 Dis. 27805