Intended Use; Improper Use; Danger Zones - Ega Master 79623 Manual De Instrucciones

Skilled personnel only is allowed to operate the machine.
Earth the fan against static electricity!
Safety guard should be fitted before starting. Ensure that unprotected intake and blow-off outlet is
fitted with protection against contact.
Remove factory-provided protective grilles for cleaning only.
Any use deviating from the intended use as described is considered to be improper use.
Working without personal protection equipment.
Operational
condition
----------------
Life phase
Transport
Operation
Drive System
Single-Phase-AC motor (protective system IP 55) 79623-110V, 79624-230V, insulation class F.
Environment temperature - 20°C to +40°C. The nominal output amounts to 100 % of the motor
output up to 1000 m sea level. Connect the contact according to the instructions of the motor
manufacturer. Safety guard should be fitted before starting. Ensure that unprotected intake and
blow-off outlet is fitted with protection against contact.
Connection Attention!
Take up all work in dead state of machine only! Main voltage and line frequency must be in
conformity with data on the rating plate. 5% voltage or frequency deviations are allowed without
reduction of output. Connect and arrange the switch bow according to the diagram of connections
contained in the clamping box. Connect protective conductor with this clamp.
Lubrication
See instructions in the manual of the motor manufacturer.
12

INTENDED USE

IMPROPER USE

DANGER ZONES

Normal function
Transport of the
machine in an
inoperable
condition
Machine only Machine runs
works with without actuated
actuated switch
OPERATION INSTRUCTION
Malfunction Improper use
Transport of the
Drop of the machine in an
machine operable
condition
Switch is blocked
in actuated
switch condition
Expected use
unknown
unknown