Safety Instructions; Intended Use; Improper Use - Ega Master 79620 Manual De Instrucciones

Any power tool can be dangerous.
Please follow these simple procedures.
They are for your protection.
Follow the general current and appropriate Accident Prevention and Safety Procedures.
Never work under the influence of alcohol, drugs or stronger medication.
Keep your working area clean and uncluttered.
Keep children away.
Switch off the machine if it stops - for any reason - to avoid the unexpected starting in uncontrolled
condition.
Do not operate the tool if it is damaged, improperly adjusted or not completely and correctly
assembled.
Check air hose for damage.
Fans installed in the open or vertically should be equipped with a rain protection roof. Please be
informed that the user only is responsible for the installation of the fan.
Check damaged parts.
Before using the machine, damaged parts or protective devices should be carefully checked to
make sure they work soundly and fulfil the designated function. Check alignment, connections and
attachment of moving parts. Also check if parts are broken. Parts or protective devices that are
damaged should, if nothing else is mentioned in these operating instructions, only be exchanged
or repaired by qualified personnel. The same applies to defective switches and valve triggers. If the
machine cannot be switched on or off with the valve trigger, it should not be used.
Only operate the tool after a thorough training or under supervision of a trainer.
Never exceed the maximum operation pressure.
Follow the valid national provisions in the country of application.
ATTENTION! Never use the flexible hose as a lifting handle!
Skilled personnel only is allowed to operate the machine.
Only use the fan after it has been securely mounted and fitted with protection against contact to suit
the application. Remove factory-provided protective grilles only for cleaning and remember to re-fit
them before use. Before working on the fan always disconnect the air hose. Earth the fan against static
electricity.
Any use deviating from the intended use as described is considered to be improper use.
Working without personal protection equipment.

SAFETY INSTRUCTIONS

INTENDED USE

IMPROPER USE

9