AquaPRO 63043 Manual Del Propietário página 14

16a. Thread the 1/4 in. elbow insert (included in regulator kit) into the 1/4 in. hole on the side of the pressure regulator.
b. Slide the pressure tubing (attached with the pump pressure switch) over the 1/4 in. brass elbow and the pressure switch
connector.
17. Wrap the threads of the thread adaptor 3/4 in. MNPT x 1 in. FPT with thread tape. And thread the adaptor in pressure
regulator. Wrap the threads of the discharge tee (included) with thread tape and thread the discharge tee in the 1 in. FPT
adaptor.
18. Connect the stainless steel braided hose from the tank to discharge tee.
NOTE: Make sure to put the rubber washer (Included) in the bottom of the thread nut on the hose.
14