Drain Hose - EAS ELECTRIC EMW8240GW Manual De Usuario

INSTALLATION
Connect the other end of inlet pipe to the inlet valve at the backside of product
and fasten the pipe tightly clockwise.
water Inlet valve

Drain Hose

！ ！
Warning! Warning!
• Do not kink or protract the drain hose.
• Position drain hose properly ,otherwise damage might result of water leakage.
There are two ways to place the end of drain hose:
1.Put it into the water trough.
Water
trough
Note!
• If the machine has
！
Warning!
• When installing drain hose, fix it properly with a rope.
• If drain hose is too long, do not force it into washing machine as it will cause
abnormal noises.
water supply hose
2.Connect it to the branch drain pipe of
drain hose support, please install it like the following .
41
the trough.
Trough
Hose Retainer
Max.100cm
Min.60cm
V.1