Maintenance Instructions - Zivan NG5 Manual De Uso

• Fix the battery charger to a stable surface through the appropriate holes inserted on the fixing flanges. In case of installation on a
vehicle it is advisable to use anti-vibration supports.
Ensure that no flammable materials are stored in the area surrounding the charger.
•
• Ensure all ventilation ports are not obstructed, to avoid the overheating. Do not put the battery charger near heat sources. Make sure
that free space around the battery charger is sufficient to provide adequate ventilation and an easy access to cables sockets.
To recharge Lead Acid batteries: WARNING: Explosive Gas – Avoid flames and sparks. The battery must be positioned in a correctly
•
cooled place.
• Verify that the available supply voltage corresponds to the voltage that is stated on the battery charger name plate. In case of doubt,
consult a retailer or local Electric Supply Authority.
• In order to protect against electric shock, please observe the in force local regulations. If an RCD is used, it is warmly recommended
the use of a class B switch. Warning: in case of damage, the charger may generate pulsating fault currents with DC components.
For safety and electromagnetic compatibility, the battery charger has a 3-prong plug as a safety feature, and it will only fit into an
•
earthed outlet. If you can not plug it in, chances are you have an older, non-earthed outlet; contact an electrician to have the outlet
replaced. Do not use an adapter to defeat the grounding.
• In order to avoid voltage drop, thereby assuring 100% charge at the battery, the output cables must be as short as possible, and the
diameter must be adequate for the output current.
After the installation make sure that all opening and doors of the charger are closed and secured
•

Maintenance instructions

Make sure charge connections to battery terminals are tight and clean.
D01755-07
NG5-7-9 CAN Bus Interface English
11