Fitting Instructions - Belle PCX 450 Manual Del Operador

Assembly Instructions for Vibrator
blow dry with compressed air.
Housing.
the rear of the Housing.
front of the Housing.
Shaft.
until oil just starts to trickle out.
oil does not leak from the Vibrator.
Paving Pad
The paving pad has been designed to be used
when tamping down paving slabs and block
pavers. However, it should not be used for
normal compaction work.
have is the correct size and the correct type
the plate ensuring the securing holes line up with
the holes on the front of the baseplate.
Transporter Attachment
The transporter attachment enables the operator to move the compactor to the work place with the minimum of effort.
Removable Transporter Attachment
The two securing bolts should be passed through the pivot bracket and the baseplate. They are in turn secured in place with the
Nyloc nut and washer.
Slide the wheel frame onto the pivot bracket, tilt the compactor forward then swing the wheel frame forward and under. Finally, tilt the
compactor back and onto the wheels.
Fixed Transporter Attachment
through the bracket and into the bedplate.
Assembly Instructions
10
4a
3a
1
2
9

Fitting Instructions

3
4
5
15
12
8
3b
4b
2
GB
11
7
6
5
GB
1