Graef CM 90 Manual De Instrucciones página 25

Coffee Grinder CM 90
note
There are two group handle
►
locators provided.
► The small one is for the
group handle in the ES 80.
► The large one is for the
group handle in the ES 90.
There are two grind funnels
►
provided: a smaller and a
larger size
Position the group handle with
‹
grind funnel into the group han-
dle locator
Flip the switch to the 'Auto' po-
‹
sition.
To select your already pre-set-
‹
measurement of ground coffee,
press the 1 cup or 2 cup buttons
located on the control panel.
The pre-programmed dose of
coffee grind will be delivered
into your group handle..
When the grind has stopped, re-
‹
move the grind funnel from the
top of the group handle and col-
lapse the coffee by tapping it on
the bench.
note
If the cutters block due to any
possible stones or other foreign
bodies do not use force. Switch
the unit off, pull the power cord
and clean the unit as described
under "Cleaning and Care". You
can now put the unit back into
operation. If it nevertheless does
not function, contact a specialist
or GRAEF factory customer serv-
ice.
How to programm 1 and
2 cup grind measure-
ments
note
The factory default setting
►
for 1 cup is 12 seconds, and
for 2 cups is 20 seconds.
To reset original factory de-
►
fault settings, press and hold
the program P button for a
period of 5 seconds. All three
buttons will flash once after
1 second - continue pressing
the program P button and all
three buttons will flash three
times at 5 seconds. This will
indicate the factory default
settings have been restored.
Position the group handle with
‹
grind funnel positioned on top
into the group handle locator.
© Gebr. Graef GmbH & Co. KG - 01
EN
25