Receive A Call; Security Settings; Phone Lock - Nokia 6015i Manual Del Usuario

Receive a call

1. Make sure the TTY/TDD device is connected to your phone.
2. Press the Send key to answer the call, and type your responses on the TTY/TDD.
3. Press the End key to end the call.
Charger
Scroll to the option of your choice, and press
its settings.
Default profile—Choose the profile you wish to be automatically activated when your
phone is connected to the charger.
Lights—Choose to keep the phone lights always on, or to shut off automatically after
several seconds. Select

■ Security settings

At the start screen, select
See Phone lock, 52 for more information.

Phone lock

Note: Avoid using codes similar to emergency numbers such as 911 to prevent
accidental dialling of the emergency number.
The preset lock code is 0000. If you enter an incorrect lock code five times in a row, your
phone will prompt you for the security code.
Note: If you enter the wrong lock code 5 times in succession, you will not be
able to enter a code for 5 minutes, even if you power off the phone between
incorrect entries.
In the standby mode, select
code and select the following: Allowed number when phone locked, change lock code,
call restrictions, voice
• Phone lock—Turns your lock on or off and to sets the lock on or off at power up.
• Allowed number when phone
emergency number programmed into your phone and the number stored in this
location.
On or Automatic.
Menu > Settings
Menu > Settings
privacy>Access codes
locked—Restricts all outgoing calls except those to the
Select to enter the submenu and modify
> Security settings
> Security settings
> Change lock code
52
and enter your lock code.
enter your 4-digit lock
Copyright © Nokia 2004