Image; Ptz - Abus TVVR33004 Manual De Instrucciones

Ocultar thumbs Ver también para TVVR33004:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 319

Image

Select the camera channel to be processed under
"Camera".
Parameter
Setting
Camera
Selection of the camera channel
to be processed
Time segments
The image settings can be set to
two different time segments per
camera (e.g. day/night). Time
Segment 2 is only available if an
adjustment is being carried out to
Time Segment 1.
Model
Preset for indoor, low light
conditions and outdoor.
Brightness
Value between 0 and 255
Contrast
Value between 0 and 255
Saturation
Value between 0 and 255
Hue
Value between 0 and 255
Sharpness
Value between 0 and 15
Noise reduction
Value between 0 and 5
All image adjustments are made locally on the recorder
(recorder signal input). Dependent on the camera model,
additional image adjustments are carried out in the
camera OSD.
100

PTZ

Select the camera channel to be processed under
"Camera". When an analogue HD PTZ camera is being
used, the control signals are transferred directly via the
BNC cable.
Select the camera channel to be processed under
"Camera".
The following actions are programmable:
Presets
Saving of individual preset
positions.
Patrol
Saving of patrols.
Pattern
Saving of motion pattern.
Linear scan.
Horizontal scan.
Saving and retrieving presets
1. Use the arrow keys to navigate the camera to the
desired image section.
2. Save the preset position by selection of a preset
number in the Preset input field. Input the desired
number via the keypad and press the "Set"
button in the Preset menu.
3. Click on the "PTZ" button and in the "General"
tab, select the position on the keypad. Press the
"Call Preset" button to go to the saved Presets
Setting up and calling up patrols
1. Create several presets to use for the patrol
2. Click on "Set" to configure the patrol. Define a
preset with dwell time and speed for each key
point.
3. Add more presets to set up the required patrol.
4. Click on the "PTZ" button and in the "General"
tab, select the position on the keypad. Press the
"Call Patrol" button to go to the saved patrol.
Camera

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Tvvr33008

Tabla de contenido