Nat Tab; More Settings Tab - Abus TVVR33004 Manual De Instrucciones

NAT tab

Parameter Setting
Enable UPnP Tick the box to enable visibility on an
IP network. When this function is
enabled, port forwarding is
automatically entered in the router for
all network ports (provided that UPnP
is enabled in the router).
If UPnP is enabled, the network ports
configured by UPnP are transferred
to the ABUS server (provided that
ABUS DDNS is enabled).
Mapping type For "manual" settings, the network
ports can be manually defined using
the "Edit" button.
For "auto" settings, the recorder
checks for free network ports on the
router and defines the port numbers
in a random pattern.
Confirm the settings by clicking on Apply and exit the
menu by clicking on Back.
93

More Settings tab

Parameter Setting
Alarm Host IP Network address of the CMS station
Alarm Host Port Port for your CMS station
Server Port Port for data communication (default:
8000)
HTTP Port Port for the web server (default: 80)
Multicast IP You can enter the multicast IP here
too in order to minimise traffic. The IP
address must correspond to the one
in the video surveillance software.
RTSP Port Enter the RTSP port
(Default: 554).
Note
Server port 8000 and HTTP port 80 are the
standard ports for remote clients and remote
internet browser access.
Configuration