How To Use External Thermostat; Operation With Portable Generator; Use Of The Heat Shielding Mat - Shizuoka Seiki VAL6 EPX1 Manual Del Usuario

3-4. How to use External thermostat

Connect External thermostat
Take the cap off the attachment plug.
1
Using an External thermostat
Therefore, in order to activate the External
thermostat, an internal thermostat knob
MUST be set on "Ext. thermo" position.
• When the heater is controlled by the internal / external thermostat or a timer, the heater could turn itself on at any time,
thus extra care must be taken to ensure that the heater is not accidentally turned on without someone nearby who can
immediately attend to any problems when the heater is ignited, operating, and cooling off.

3-5. Operation with Portable Generator

• Before operating the heater from a portable generator, please confi rm that the generator has been properly connected to the
ground earth. To operate the generator without proper grounding may result in electrical shock. Please refer to the owner's
manual supplied by the generator's manufacturer.
The heater operates within the voltage range
of 207Volts to 253Volts for 230V spec./
108Volts to 132Volts for 120V spec. Before
plugging the heater into the generator, the
output voltage of generator should be verifi ed.

3-6. Use of the Heat Shielding Mat

To avoid unexpected fi re or trouble, NEVER
use the heater on combustible flooring un-
less the heat shielding mat, which is avail-
able as an option, is used.
13
Insert the thermostat plug.
2
CAUTION
WARNING
If the voltage does not measure in this range,
the heater should not be plugged into the gen-
erator.
Heat shielding mat
To Thermostat