Basic Settings For The Preparation Of Coffee - Unold 28811 Manual De Instrucciones

basic settings for the PreParation of coffee

Water quantity per cup
According to general standards, the default setting corresponds to
the following quantities:
40 ml (adjustable from approx. 40-80 ml)
120 ml (adjustable from approx. 100-150 ml)
200 ml (adjustable from approx. 150-300 ml)
Nevertheless, the quantity of water per cup can be adjusted to
your needs within the limits indicated above. Please proceed as
follows:
Make sure that the display indicates
BETRIEBSBEREIT
(READy). Then press the button corresponding to the desired cup
size and maintain this button pressed. As soon as the desired
level is achieved, release the button. The automatic coffee
machine stops the brewing process and saves the brewed quantity
as standard for the corresponding cup size. The next time you
brew coffee with the corresponding button, the saved quantity of
coffee will be brewed.
atteNtIoN:
Please use a measuring cup when adjusting the water quantity. If the
button is still pressed when the minimum or maximum quantity for the
respective cup size is reached, the appliance returns to the default
settings without saving the new settings.
The settings can be adjusted for all three cup sizes
correspondingly.
The capacity per cup can be saved within the limits indicated
above. If the respective lower or upper limit is exceeded, the
automatic coffee machine activates the corresponding minimum
or maximum capacity.
Quantity of coffee powder per cup
The default setting is of 7 to 8 g ground coffee per cup. If you
desire to change this quantity, please open the lateral cover of the
automatic coffee machine.
Push the red lever above the brewer assembly towards - to reduce
the quantity and obtain a weaker coffee or towards + to increase
the quantity and obtain a stronger coffee. Adjustments can be
made between 6 and 9 g.
atteNtIoN:
In order to increase the service life of the appliance, we recommend
not to adjust the appliance permanently to the maximum coffee
powder quantity.
Degree of grinding
The default setting corresponds to a medium degree of grinding.
The degree of grinding may be also adjusted as you require. For
this purpose, open the coffee beans container and turn the knob
to set the degree of grinding (0 = very fine to 12 = coarse).
The finer the grind, the more intense the aroma of your coffee.
caUtIoN:
The setting must be adjusted while the grinder is in operation. Do
not change the setting when the grinder is not operating in order
to prevent the grinder from being damaged.
As there may be some ground coffee left in the grinder from
previous use, the adjustment may not make a difference until
the second or third cup. If necessary, you may correct the setting
accordingly.
In order to increase the service life of the appliance, we recommend
not to adjust the degree of grinding permanently to the finest
grind.
atteNtIoN:
If the pre-grind feature is selected, there will be always a certain
amount of coffee powder in the coffee powder chamber. this might
block the red lever when trying to adjust the quantity in one step.
to avoid this, we recommend to deactivate the pre-grinding feature
temporarily or adjust the quantity in several steps.
25