Descargar Imprimir esta página

Transporting; Preparation For Storage - Dolmar GE-1100 Manual De Instrucciones

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 69
(a) Check the fuel (gasoline), engine oil and air
cleaner.
(b) Start engine.
(c) With appliance such as lightings activated,
run the engine for over ten minutes.
(d) Check for the following items;
Proper engine running.
■ ■
Adequate output and the indicator lamp
■ ■
turned on properly.
The engine switch normally operated.
■ ■
No leakage of engine oil and fuel (gasoline).
■ ■

10. TRANSPORTING

When transporting the generator, make sure that
the fuel (gasoline) should be drained from the
tank.
WARNING
To prevent fuel spillage due to the
■ ■
vibration and impact, never transport
the generator with the fuel (gasoline)
filled in the tank.
Secure the tank cap thoroughly.
■ ■
To avoid the risk of the gasoline
■ ■
flammability, never leave the generator
in an area exposed to direct sunlight or
high temperatures for a long time.
Keep the fuel (gasoline) in the exclusive
■ ■
gasoline storage tank made by steel
when transporting.
(a) Turn the engine switch to the "
position.
(b) Drain the fuel from the tank.
(c) Secure the tank cap and set the cover in
position.
Do not place any heavy objects on the
■ ■
generator.
Select and place the generator in the
■ ■
proper position of the transport vehicle
so that the generator not be moved or
fallen down.
Fix the generator with rope as necessary.

11. PREPARATION FOR STORAGE

(See Fig. 6 6 )
The following procedures should be followed
prior to storage of your generator for periods of 6
months or longer.
Drain fuel from fuel tank carefully by
■ ■
disconnecting the fuel line.
Gasoline left in the fuel tank will eventually
deteriorate making engine-starting difficult.
When draining fuel from the fuel tank, use the
■ ■
hand pomp and set it into the refilling port.
(See Fig. 6 6 -q q )
Remove the drain screw of the carburetor.
■ ■
"(
STOP)
(See Fig. 6 6 -w w )
q DRAIN SCREW
Change engine oil.
■ ■
Check for loose bolts and screws, tighten
■ ■
them if necessary.
Clean generator thoroughly with oiled cloth.
■ ■
Spray with preservative if available. NEVER
USE WATER TO CLEAN GENERATOR !
Pull starter handle until resistance is felt,
■ ■
leaving handle in that position.
Store generator in a well ventilated, low
■ ■
humidity area.
TANK CAP COVER
FUEL TANK CAP
CAUTION
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
13

Publicidad

Solución de problemas

loading

Este manual también es adecuado para:

Ge-1700 i