Fitting The Carrying Ring; Mounting The Deflector - Stihl FS 85 Manual De Instrucciones

English

Fitting the Carrying Ring

Polymer Version
1
For position of carrying ring see "Main
Parts".
Push the carrying ring (1) over the
N
drive tube.
Insert the M5 nut in the hex recess
N
in the carrying ring.
Fit the M5x14 screw.
N
Line up the carrying ring.
N
Tighten down the screw firmly.
N
70

Mounting the Deflector

Mounting the Deflector
1
3
2
3
1 Deflector for mowing attachments
2 Deflector for mowing heads
Deflectors (1 and 2) are both mounted to
the gearbox in the same way.
Place the deflector on the gearbox
N
flange.
Insert the screws (3) and tighten
N
them down firmly.
Fitting the Skirt and Blade
WARNING
Risk of injury from thrown objects and
contact with the cutting attachment.
These parts must be fitted to the
deflector (1) when you use a mowing
head.
Fitting the Skirt
Slide the lower guide slot of the skirt
N
onto the deflector – it must snap into
position.
Removing the Skirt
2.
Insert the stop pin into the hole in
N
the skirt and use it to push the skirt
to the left.
Pull the skirt off the deflector.
N
FS 85, FS 85 R
1.