Install Steam Oven On Top Of Storage Drawer; Installing Drawer To Housing - Thermador Masterpiece and Professional Series Guía Para La Instalación

Install Steam Oven on Top of Storage
Drawer
Note: Installing the drawer before installing steam oven
may scratch drawer face.
The steam oven must be installed on top of the storage
drawer prior to reinstalling the drawer into the storage
drawer housing. Slide steam oven directly on top of the
storage drawer housing until it is flush with the cabinet.
Refer to the unit installation guide accompanying the
steam oven for detailed installation instructions.
Reinstall the drawer to the storage drawer housing.

Installing Drawer to Housing

The slides mounted to each side of the housing wall
have two moving components, an inner rail and a ball
bearing carrier which need to be in the proper orientation
for accurate installation and alignment.
There is also a visible locking mechanism located at the
rear of each slide.
A Ball Bearing Carrier
B Slide Inner Rail
C Locking Mechanism
The slide inner rail should be set to the drawer locked
1.
position for proper installation. With the drawer
removed push the slide inner rail toward the rear of
the housing until it locks in place and does not spring
back to the open position.
A Slide Inner Rail
B Locking Mechanism
Note: A moderate force pushing on the black plastic
ball carrier locking mechanism is required to set the
slide to the drawer locked position. The drawer is
locked when it remains in place and does not spring
back to the open position.
15