Residual Risks - HOLZMANN MASCHINEN PSM 2 Manual De Instrucciones

 After adjustment, maintenance or repair work, make sure that no tool is left in/on the
unit.
 Keep the device away from potential ignition sources (e.g. indicator lights and/or naked
flames, burning cigarettes, etc.). There is a high risk of fire and explosion.
 Never remove the dust bag when the engine is running.
 Always store grinding dust in lockable, fireproof, non-combustible containers outdoors!
 Make sure that the mains switch is in the "Off" position before connecting the machine to
the mains.
 Never run over the connection cable with the machine!
 Make sure that the device is earthed.
 Use only suitable extension cables.
 Switch off the unit before cleaning, maintenance or repair work, disconnect it from the
mains and protect it from being switched on again unintentionally.

12.3 Residual risks

Despite proper use, certain residual risks cannot be completely eliminated. Due to the design and
construction of the machine, hazardous situations may occur which are indicated in these
operating instructions as follows:
A safety instruction of this type indicates an imminently dangerous situation which, if
not avoided, will result in death or serious injury.
This type of safety information indicates a potentially hazardous situation which, if
not avoided, could result in serious injury or even death.
A safety notice designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate injury.
Such a safety notice indicates a potentially hazardous situation which, if not avoided,
may result in property damage.
Regardless of all safety regulations, their common sense and appropriate technical
suitability/training are and will remain the most important safety factor for fault-free operation of
the machine. Safe working depends on you!
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
DANGER
WARNING
CAUTION
NOTICE
SAFETY
19
PSM2 / PSM3