Fitting The Seat Onto The Pram; Maintenance - Be Cool ONE Manual Del Usuario

EN

5. FITTING THE SEAT ONTO THE PRAM

With the handle set to position 4 (diagram 2e), slot
5a.
the baby carrier onto the pram anchors until you hear
it click into place.
5b. To detach the baby carrier from the pram, press the
profix button (10) and pull the baby carrier upwards.

MAINTENANCE

Removing / Fitting the cove
The cover of the ONE seat is very easy to take off. On
the front part there are 2 fastening points for the cover.
Unfasten these two points and gently pull the front part
of the cover.
On the sides of the seat there are some plastic parts
designed to hold the cover in place. Simply pull the
cover over them gently to take it off.
To fit the cover back on again, follow the same steps in
reverse. Place the parts in the slot for the sides.
28
IM 2041,00 ONE instruc ok.indd 28
Cleaning
The cover can be machine washed using mild deter-
gent and at a maximum temperature of 30o. Please
follow the washing instructions on the care label of
the cover.
Do not tumble dry as this could cause the padding to
come away from the fabric.
Do not expose the upholstery to sunlight for prolonged
periods of time, when the seat is not in use cover it up
or store it in the car boot.
The plastic parts can be cleaned with a damp cloth and
neutral detergent.
Recommendations
Keep this instruction book for future reference.Always
keep it in the compartment under the base. In the
vehicle, make sure that any luggage or other objects
that could cause injury in the event of an accident are
securely fastened or stored.
31/1/19 16:52