Removal Of Dirty Water Tank Lid; Installation Of Dirty Water Tank Lid; Filling The Water/Detergent Tank; Emptying The Water/Detergent Tank - IPC CT5 LAVAMATIC Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 106

Removal of dirty water tank lid

Release the lid of the dirty water tank by pressing the two sliding
catches toward one another (fig. 19, ref. 1).
Lift off the lid.

Installation of dirty water tank lid

INCORRECT positioning of the lid on the dirty water tank will cause
the machine to malfunction when the floor is being dried.
Place the lid on the tank.
Apply downward pressure to the lid, sufficient to make certain that
the two sliding release catches spring outwards and engage with
the top of the dirty water tank (Fig.20).
The lid is correctly installed when the RED background presented
by the recesses of the two catches can NOT be seen (fig. 20).

Filling the water/detergent tank

Unplug the machine from the power socket (mains powered model).
Remember to empty the dirty water tank every time the clean water
The tank can be filled in two different ways:
Tank installed on the machine:
Turn off the machine at the main switch.
Remove the cap of the detergent tank (fig.21, ref. 1).
Fill the tank.
Tank removed from the machine:
Turn off the machine off at the main switch.
Press in the two lateral tank retaining catches (fig. 22, ref. 1),
separate the dirty water tank from the frame and set it down on
the floor.
Remove the cap of the detergent tank.
Separate the detergent tank from the frame.
Fill the tank (fig. 23).

Emptying the water/detergent tank

Unplug the machine from the power socket (mains powered model).
The tank can be emptied by proceeding as follows:
Turn off the machine off at the main switch.
Take the machine to the designated disposal area.
Press in the two lateral tank retaining catches (fig. 22, ref. 1),
separate the dirty water tank from the frame and set it down on
the floor.
Separate the detergent tank from the frame.
Remove the cap of the detergent tank.
Empty the contents of the tank by way of the front opening (fig. 24).
! INFORMATION
! INFORMATION
! DANGER
! INFORMATION
and detergent tank is filled.
! DANGER
Fig.24
EN
1
Fig.19
Fig.20
1
Fig.21
1
1
Fig.22
Fig.23
19

Publicidad

Tabla de contenido
loading

Tabla de contenido