Tokai TC-138 Manual De Instrucciones página 18

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Action (during data adjustment) :
-
Press << / Tune - button (4) to adjust data backward.
-
Press >> / Tune + button (5) to adjust data forward.
-
Keep depress << or >> button for 2 seconds to enable auto forward.
ENABLE / DISABLE THE ALARM
Press and hold the "ALARM 1" (6) / "ALARM 2" (7) button to enable or disable
the alarm. Once the alarm is activated, the bell symbol will be appeared on the
display.
ALARM DURATION
Beep alarm or radio alarm will ring for 30 minutes if no key is pressed, then it will
stop automatically and wait for same alarm time on next day.
SNOOZE FUNCTION
When Alarm rings, press Snooze button (1) to suspend the alarm & to activate
the snooze function, Beep or Radio alarm will stop. 9 minutes later the alarm will
ring again. Press SNOOZE key again, alarm will be suspended again, another 9
minutes later the alarm will ring again and so on until the next alarm rings.
Note: The interval time of the Snooze function is 9 minutes.
-
If you want to disable the SNOOZE function and stop alarm completely,
press ON/OFF button (9). If you don't press any button, the alarm will ring
during 30 minutes & stop automatically.
DISPLAY LIGHT ON/OFF FUNCTION:
-
Press & hold the display auto ON/OFF button (5) for 3 seconds, the LED
display Indicator will light on, the LED display will turn off after 15 seconds
automatically, Press any button to maintain the LED display for 15 seconds.
-
Press & hold the display auto ON/OFF button (5) for 3 seconds, the LED
display Indicator will light off to cancel this function.
AUTO CHANGE DISPLAY CONTENT:
In radio off mode, press & hold the DISPLAY AUTO CHANGE ON/OFF button
(4) for 3 seconds to enter time display auto change mode. to display the Year
and press again to display Month/Day, the display returns to time display after 5
seconds.
BASIC OPERATIONS
18

Publicidad

Tabla de contenido
loading

Tabla de contenido