Other Operations - Tokai TC-138 Manual De Instrucciones

OTHER OPERATIONS

DIMMER CONTROL
In standby mode, press the DIMMER (1) button allows you to set the brightness
of the LED display to high, medium ,low 3 levels.
NAP FUNCTION (count down timer)
In radio off mode, press the NAP button (2), to enter into the NAP mode,
the NAP time 90 will be displayed during 5 seconds. In the meantime, press
repeatedly NAP button (2) button to set the duration time from 90 min to 10 min.
Once time is up, the alarm buzzer will sound for 30 min and then shut off
automatically. To stop the alarm buzzer, press the ON/OFF button (9).
Press the NAP button (2) button has no effect during alarm operation.
Press ON/OFF button (9) to cancel the NAP function.
DAYLIGHT SAVING TIME (DST) MODE
For countries with daylight saving time (DST) (one hour of difference between
summer time and winter time), this clock radio offers you DST option to adjust
summer time.
In standby mode press and hold for 3 seconds the DST button (1).
The clock advances by one hour. To exit DST mode, repeat the above operation
RESETTING
If the system does not respond or exhibits erratic or intermittent operation, you
may have experienced an electrostatic discharge (ESD) or a power surge that
triggered the internal microcontroller to shut down automatically. If this occurs,
simply disconnect the ac power cord and remove the system backup battery,
wait for at least 3 minutes and then setup the unit again as if it is a brand new
unit.
20