Publicidad
Idiomas disponibles
Idiomas disponibles
SET FOR FITTING NON-ORIGINAL CAR RADIOS
GB
Warning
The set for additional fitting of car radios is only intended for professional fitting by contractual
partners of Škoda Car. The fitting requires the use of special tools and workshop manuals and
therefore this set must not be sold to the end user in an unassembled state.
This set is intended for additional fitting of non-original car radios to Škoda Yeti vehicles with
provision for the original radio.
Order the following items from the range of Škoda genuine parts for the fitting based on the
vehicle' s specific equipment.
– Central cover of the dashboard for the navigation system – order number 5L0 858 069
xx yyy (xx index based on vehicle' s equipment, index yyy based on the color Ref. ETKA spare
parts catalogue).
Fitting procedure
Remove and reassemble the individual vehicle parts based on the instructions in the ELSA
electronic service information system. Keep the car battery connected during the fitting.
– Remove the car radio rack and dummy plug (according to the vehicle' s equipment).
– Remove the instrument panel.
– Remove the vehicle' s fuse box.
Explanatory notes to figures:
Fig. No. 1 – List of parts in the set
Name of part
Car radio rack
Retaining clip
Bundle of electrical connection cables for the car radio
Damper – sound proofing
Interconnecting wire
5A fuse
Terminal box
Connector
Plastic tie
Screw
Nut plate
Fig. No. 2
Black/white current lead of the electrical connection cables for the car radio.
- Pull the black/white current lead through the opening in the instrument bracket towards
the instrument panel.
No. of pc Position
1
A
2
B1, B2
1
C
1
D
1
E
1
F
1
G
1
G1
2
H
4
J
4
J1
Publicidad
