Whirlpool 7MWFC9822HC1 Manual De Uso Y Cuidado página 13

Drying Function (Step 10)
10.
Select drying function, if desired
4:28
What to Wash
REGULAR
Temperature Spin Speed
WARM
From the home screen, touch the "Drying Mode" area of
the screen to show the available Drying Mode settings.
From the Drying Mode screen, choose between Automatic
Drying and Timed Drying. For Automatic Drying, touch AUTO
DRY; then touch the screen to choose between Damp Dry, Dry,
and Extra Dry. For Timed Drying, touch TIMED DRY; then touch
the screen to choose from among 1 hr, 1.5 hr, 2 hr, 3 hr, and 4 hr.
Expect longer drying times than with traditional vented dryers.
NOTE: When a wash and dry cycle is selected, only Fast Spin
speed will be available.
3:15
How to Wash
NORMAL
Auto Dry
FAST Dry
To run a dry cycle only:
Load the drum half full or less for optimal drying performance and
cycle time. From the home screen, touch the "Drying Mode" area
of the screen to show the available Drying Mode settings, and
from the Drying Mode screen, after making the Automatic Drying
or Timed Drying choices as mentioned above, touch "DRYING
ONLY ON." Do not open the door during the drying cycle.
NOTE: The washer will spin at high speed prior to running the
dry cycle.
IMPORTANT:
■ Do not use dryer sheets.
■ Do not dry comforters or large blankets.
11.
Select options, if desired
From the home screen, touch the Options icon (at upper right of
screen) and the Options screen will show Soil Level, Extra Rinse,
Pre-Soak, FanFresh,
selected "What to Wash" and "How to Wash" options will be
shown on the screen. Touch the screen for each option to
change its setting.
Soil Level Option
The recommended soil level is preset for each cycle. The Soil
Level option allows you to select a Light, Normal, or Heavy soil
level setting. Some preset soil levels can be changed. For heavily
soiled and sturdy fabrics, select the Heavy soil level setting.
For lightly soiled and delicate fabrics, select the Light soil level
setting. Lower soil level settings will help reduce tangling and
wrinkling.
Extra Rinse Option
The Extra Rinse option provides an additional rinse to the
selected cycle.
†
Pre-Soak Option
The Pre-Soak option can be set for 30 min, 1 hr or 8 hr.
FanFresh Option
®
The FanFresh
®
end of the cycle for up to 12 hours. Touch FAN FRESH to activate
this option. This option is not available when a drying mode
is selected. FanFresh
the "X" on the touch screen to the right of the estimated time
remaining.
Wrinkle Shield Option
The Wrinkle Shield option is only available when a drying mode is
selected, and will periodically tumble the load after the end
of the cycle for up to 12 hours. Wrinkle Shield may be ended
at any time by touching the "X" on the touch screen to the right
of the estimated time remaining.
Not all options and settings are available with all programs/cycles.
†
See "Cycle Guides" for available options and settings.
and Wrinkle Shield selections. Previously
®
option will periodically tumble the load after the
may be ended at any time by touching
®
†
13